Skip to main content
Reverse Channel Letters Get A Free Quote
Reverse Illuminated Channel Letters

Reverse Illuminated Channel Letters

Reverse illuminated channel letters keep their light out of sight. Each 3D letter, usually made of 304 stainless steel or acrylic, holds LEDs that aim at the wall, and the wall answers with a band of light that follows every curve of your lettering. Switch them off and you have a crisp three-dimensional sign. Switch them on and the halo lifts each letter so it appears to hover in front of the wall, which makes the lettering look even more three-dimensional. You will see them indoors and outdoors at shops, schools, public buildings and offices, and today they are one of the most widely used ways for an organization to put its name on display.

Get A Free Quote

Reverse Illuminated Channel Letters Sample Projects

Click any photo for a brief overview of the project.

What illuminated means here

Illuminated here means lit from behind. The light is real, yet you never look straight at a lamp. Thanks to careful workmanship, you will not see individual LED dots either, and the glow comes out even. It leaves each letter on the wall side, lands on the surface behind, and comes back to the viewer as a halo. That indirect route is what gives these signs their calm, upscale look in a lobby or on a storefront. If you have a special design in mind, we can give the light a character of its own too, for example a halo that throws star shapes or spots onto the wall. Contact us to have it made to order.

Where the idea came from

Long before LEDs, sign shops built marquee letters as open channels lined with light bulbs. Someone turned those channels around so the bulbs faced the building, and the glow they threw on the wall became known as a halo. Bulbs have since given way to LEDs sealed inside metal or acrylic letters, but the principle has stayed the same.

What happens inside a letter

Each letter, number or logo piece is wired as a separate unit, with LEDs and a circuit of its own. By default we use BlueView brand LED modules, rated to run beyond 100,000 hours. Opal acrylic sits in the path of that light and softens the individual points into one even band. Metal next to the LEDs, the steel channel on metal letters or the aluminum back panel on acrylic ones, is a key path for the heat the LEDs give off while they work.

Two ways the light reaches your eyes

Our three models share one principle but send the light out by two different routes, and that shapes the halo you get.

  • Straight from the acrylic. On Pro Metal Reverse Channel Letters a stepped acrylic base shows past the steel edge, and on Acrylic Reverse Channel Letters the rear band of the acrylic is left unpainted. When these letters are mounted flush, light leaves that exposed acrylic directly, so some of it meets the eye and some of it washes the wall. The result is a brighter, wider halo, and how reflective the wall is makes very little difference to it.
  • Bounced off the wall. On Basic Metal Reverse Channel Letters the acrylic is hidden inside the steel channel. Light passes through it, strikes the wall and bounces toward the viewer, which gives a gentler glow. You see no light coming from the letter itself, just the glow it leaves on the wall.

Neither route is a better or lesser version of the other. One reads as bold and luminous, the other as soft and understated, and the design usually decides which suits it.

How the gap shapes the halo

Think of a flashlight pointed at a wall. Hold it close and the spot is small and bright. Pull it back and the spot grows while the wall gets dimmer. Letters spaced off the wall behave the same way: a larger gap draws a bigger but fainter ring of light, and a smaller one a tighter, brighter ring.

Basic Metal Reverse Channel Letters always stand off the wall, since a reflected halo needs room to spread. Stainless steel tube spacers set that distance, and the wires and stud bolts stay tucked inside them. Prefer a particular look? Ask for a different spacing before production and we will build around it. Default spacer length: 13/16 in (20 mm).

Pro Metal Reverse Channel Letters and Acrylic Reverse Channel Letters are mounted flush by default. Against the wall, the glowing part is the band of acrylic around the edge. When a wall is not right for a flush fit, these letters go on spacers too. Pro Metal Reverse Channel Letters mounted that way light their whole acrylic base, sides and back.

The wall behind the letters matters

Because the halo of Basic Metal Reverse Channel Letters is made by reflection, how much light the wall gives back changes how it looks. The wall color and surface count for much more here than with Pro Metal Reverse Channel Letters or Acrylic Reverse Channel Letters. A photo of the wall, sent along with your artwork, lets us say how each build will read on it.

Curved walls work too. Standard letters go on spacers there. Letters shaped to the curve keep the same distance from the wall all along the word, so the glow stays even from end to end.

Choosing the color of the light

Three whites cover most projects: 6000K white, 4000K natural white and 3000K warm white. For color, red, yellow, blue and green are the usual picks. RGB or RGBW letters can change color, normally from a wireless controller. If you plan to run your own controller, check with us first that it works with RGB or RGBW.

A specific color temperature or a light color outside this list can be set at the factory. Tell us what you have in mind. A colored halo will be near the shade you describe, though light does not match a printed color chart the way paint can.

Lights on, lights off

With the lights off, people see the face and returns of each letter, so the finish still matters. Metal letters can be brushed, mirror polished, given a vibration finish, or painted and powder coated in gloss, semi-gloss or matte. Plated tones such as bronze, gold, copper, black titanium, brass and rose gold are also on offer, along with many more, and plating adds around 3 business days. Pair a warm white glow with a gold face, or a crisp 6000K white with brushed steel, and the sign looks finished both ways.

Keeping the glow steady outdoors

Outdoor letters must have waterproof LEDs and an outdoor rated power supply, and we build every outdoor set that way. For regions with heavy rain we fit IP67 LEDs and drill drain holes in the bottom of each letter. Signs near the sea or in salty air need marine-grade 316 stainless steel, used for the letters and for every piece of mounting hardware alike, so tell us about the site. Its working range runs down to -22°F (-30°C) and up to 158°F (70°C).

Power comes from Mean Well power supplies, LPV-60-12 by default, with an input range of 90 to 264V AC. Default LED voltage is 12V DC, with 24V DC as an option. We measure the wattage of your finished sign and match the power supplies to it, which is why three rules hold without exception:

  • Never wire the sign into a circuit outside the input range of its power supply. Where the voltage at your site lies beyond that range, mention it ahead of production and we will search hard for suitable power supplies.
  • Always follow our wiring diagram to the letter, so each power supply carries the load it was sized for.
  • Never add, remove or swap a power supply. The count was set by measurement.

A professional sign installer gives the cleanest, safest result, and an electrician completes the final connection using our diagram. Yelp or Google Maps will turn up installers near you.

Sizes, timing and warranty

Across all three models, letters cannot be made shorter than 3-15/16 in (100 mm). Stroke width matters too. On metal letters, strokes can be no thinner than 3/8 in (10 mm). On straight-sided acrylic letters, the minimum is 13/16 in (21 mm). If your artwork is finer than that, share the vector file and we will show you how to adapt it. Once the drawing is approved, allow roughly 15 business days to build the set and about one more week for DHL delivery. Every set carries a UL Listing. Our 3-year limited warranty also applies, and any part that fails because of faulty materials or workmanship gets replaced at no charge. Need something beyond our defaults, such as a deeper letter or a longer warranty? Send us the details, and we will build the set around them.

Related: Reverse Lit Channel Letters, Reverse Pan Channel Letters and Reverse Channel Letter Signs.

Reverse Illuminated Channel Letters FAQ

The wall. LEDs inside each letter send light backward, and it spreads across the surface behind as a halo. The face stays solid and shows its finish.

Pro Metal Reverse Channel Letters and Acrylic Reverse Channel Letters, since light leaves their exposed acrylic directly. Basic Metal Reverse Channel Letters depend on light reflected from the wall, which makes a softer halo.

Our default spacers set a gap of 13/16 in (20 mm). A wider gap makes a bigger, dimmer ring, and a narrower gap a smaller, brighter one. If you would like a different effect, ask for another spacing before production starts.

Yes. RGB or RGBW letters change color, usually from a wireless controller. Fixed whites and single colors are available as well.

Our default BlueView LEDs are built for a rated life of over 100,000 hours. Each set is also covered by our 3-year limited warranty.

Quick Form

If we don't hear back by email, we will send you an SMS.

Every reverse channel letter sign is made to order, so the more details you share, the more accurate our reply will be.

CAPTCHA image

Reverse Channel Letters Models

One lighting principle, three models. Open a model to see how it glows and its full specification table.

Acrylic Reverse Channel Letters

Acrylic channel CNC carved from solid opal acrylic, with an aluminum back panel that carries the LEDs. The face and the edges next to it are painted to block the light, so it escapes through the bare edges by the wall and casts a beautiful, intense halo there. An unpainted acrylic edge casts light directly on the wall, and the halo is as bright and wide as Pro Metal Reverse Channel Letters.

More Details about Acrylic Reverse Channel Letters